Print Page - Drill through between report objects

Title: Drill through between report objects
Post by: Mita on 25 Nov 2016 01:26:37 AM

Hi,

Can any one confirm if the below is possible in report studio
1.Drill through from List to crosstab
2.Drill though from chart to crosstab
3.Drill though from list to chart
4.Drill though from crosstab to chart

Thanks in Advance

Title: Re: Drill through between report objects
Post by: dax on 27 Nov 2016 09:21:09 PM

Hi

All of those can be done in Report Studio - there isn't a restriction on what data containers (List, Crosstab, Chart) that you can drill between. If you are able to construct your target report (the report that will open when the drill through is executed) so that it's able to receive parameters from the source report then what you are asking should be possible.

HTH
Dax

Title: Re: Drill through between report objects
Post by: Mita on 28 Nov 2016 04:10:28 AM

Thank you so much Dax.. :) :)

COGNOiSe.com - The IBM Cognos Community

IBM Cognos 10 Platform => Cognos 10 BI => Report Studio => Topic started by: Mita on 25 Nov 2016 01:26:37 AM