Text only | Text with Images

COGNOiSe.com - The IBM Cognos Community

IBM Cognos 10 Platform => Cognos 10 BI => Report Studio => Topic started by: BigOCombe on 10 Apr 2013 07:44:14 AM

Title: Chart - 2 Y axis
Post by: BigOCombe on 10 Apr 2013 07:44:14 AM
Hello everyone,

I have looked and read about adding a secong Y axis. I am using report studio (10) and I have tried using a simple column chart and dropping both measures into the Series (primary axis) and a combination chart and dropping both measures into the Series (primary axis). When I click on one of the measures I don't see anything in the properties tab that shows changing the Y axis. Where am I going wrong?

Thanks!
Title: Re: Chart - 2 Y axis
Post by: sureshsugu on 10 Apr 2013 08:35:21 AM
Hi,
      Under Series, you can see list of your measures. Just click one measure and on your left you can see properties and be make sure you are selecting Bar->Under General->Select Axis Alignment->Change to Y1 axis or Y2 Axis.

thanks,
Suresh.
Title: Re: Chart - 2 Y axis
Post by: BigOCombe on 10 Apr 2013 08:53:54 AM
Suresh,

I use the column chart add both my measures. I click on them and then select bar under the properties, but there is no option for selecting the axis alignment. I have attached a screen shot of the basic report. Is there something else I might be missing?

Thanks!

Title: Re: Chart - 2 Y axis
Post by: calson33 on 10 Apr 2013 10:04:30 AM
did you turn on the second Y axis in the chart properties?
Title: Re: Resolved Chart - 2 Y axis
Post by: BigOCombe on 10 Apr 2013 10:14:35 AM
That solved the issue. Thanks!
Text only | Text with Images